Prepare a model in other tools
What to export from 3ds Max, Maya, Cinema 4D, ZBrush, JewelCAD, CounterSketch, Matrix 9 and other tools, so that the file works on iJewel3D.
The rules are the same in every tool: millimetres, one material for each part with the name Metal 01 or Gem 01, one material for each gem cut, flat facets on the stones, instances for the identical stones, and a light mesh. The 3D model guidelines page gives the reasons.
Which format to export
| The tool exports | Do this |
|---|---|
| GLB | Export GLB. The material names become the layer names. |
| 3DM | Export 3DM in Shaded mode, with Save small off. Refer to Rhino and MatrixGold. |
| FBX or OBJ with materials | Export it. Name the materials Metal 01 and Gem 01 first. |
| STL only | Open the STL file in Rhino or Blender. Put the parts on layers or materials. Then export 3DM or GLB. An STL file has one material for the whole model. |
Tool notes
| Tool | Notes |
|---|---|
| 3ds Max, Maya, Cinema 4D | Export GLB. Give each part its own material with the platform name. Make the stones separate objects with flat normals. Use instances for the identical stones. |
| ZBrush | Decimate the sculpt first. A sculpted ring has millions of polygons. Export OBJ, then set the materials in Blender or Rhino. Stones from ZBrush have no flat facets. Replace them with modelled stones. |
| MatrixGold | Refer to Rhino and MatrixGold. |
| Matrix 9 | Matrix 9 saves Rhino 5 files. The platform does not open them. Open the file in Rhino 7 or Rhino 8, set the viewport to Shaded mode, and save it again. |
| JewelCAD | Export OBJ or FBX. The platform does not read JCD files. Set the materials in Blender or Rhino before the export. |
| CounterSketch | In a CounterSketch file, the stones are often blocks without render meshes, and they do not show. Open the file in Rhino, set Shaded mode so that Rhino meshes the stones, put the parts on layers, and save 3DM. |
| 3Design, Firestorm, RhinoGold | Export 3DM when the tool offers it. Then do the Rhino steps. |
| SolidWorks, Fusion 360 | Export STEP, open it in Rhino, and do the Rhino steps. Set a fine mesh for the small surfaces. |
| A 3D scan | A scanned stone has no facets, and the renderer cannot draw its cut. Model the stone with its real facets. |
Production CAD
Most files from a factory are made for casting, not for the camera. Before you render, correct these points in your tool:
| In the production file | For the render |
|---|---|
| Long prongs, ready for the setter | Shorten the prongs to the finished length. |
| Sharp edges | Round the edges. |
| Seams between parts | Close the seams, or join the parts. |
| One metal part for a two-tone piece | Split the metal into Metal 01 and Metal 02. |
| Parts that go through each other | Remove the overlap. Two surfaces at one position flicker. |
| Stones as simple cones or spheres | Replace them with modelled stones with facets. |